The Peco Service And Meter Application form is a comprehensive document designed to be completed by individuals or contractors in need of new, temporary, or modified electrical service installations or meter configurations. It guides applicants through the process of providing essential information, such as customer details, service characteristics, and load requirements, ensuring all necessary data is captured to process the request efficiently. For a smooth application process with PECO, click the button below to fill out your form today.
Navigating the process of obtaining electric service and meter installation with PECO becomes straightforward with the comprehensive PECO Service And Meter Application form. This form serves as a key initial step for customers aiming to set up new electric service connections, make changes to existing services, or update their metering solutions. It meticulously outlines various requirements including customer details, service location, billing information, and specific electric service characteristics tailored to residential or commercial needs. Applicants are guided to provide detailed information about their construction status, the type of service required (e.g., aerial or underground), and the specific characteristics of the load their service will be supporting. Additional requirements like site plans, single line diagrams, and substation arrangements are indicative of the form’s thoroughness in ensuring all aspects of electric service and metering are covered. Instructions urge applicants to contact regional offices directly, emphasizing the importance of accuracy and completeness to prevent delays. Compliance with PECO’s Electric Service Requirements manual and local inspection approvals underscore the procedural and safety standards upheld in the process. This structured approach not only facilitates a smoother application process but also aligns with regulatory and company protocols to ensure efficient and reliable electric service setups.
INSTRUCTIONS FOR PREPARING APPLICATIONS FOR ELECTRIC SERVICE & METER
Please refer to the sample application while reviewing the following notes. The letters below correspond with those on the sample. NOTE: THE "BLANK" FORM IS BELOW THE "SAMPLE" FORM
A.After reading the instructions at the top of the application, locate the PECO regional office in which the service is requested. Check the appropriate box and mail or fax the completed application to the appropriate regional office.
B.Complete the fields for customer's name and service location. Customer's Driver's License Number or Social Security Number is now required.
Note: (*) Include PECO Energy pole # and/or Lot # only if applicable.
(**) Use the address of the service when applying for underwriter's inspection.
C.Complete the fields for customer's PECO billing address or account number (within last 60 days).
D.Complete fields regarding you as the electrician or contractor, and indicate where you would like the reply sent. The Electrician/Builder Tax Identification number is now required. Also, please include the date you would like the reply returned to you.
E.Indicate your current construction status, and include the date PECO service is requested. Please avoid using "as soon as possible".
F. thru J. Indicate the following:
•Type of Request
•Type of Service (include number of units and area per unit)
•Service Characteristics
•Meter Information
•Heating/Air Conditioning
K.Complete the table concerning the load characteristics of the service. For each applicable type of load, provide: 1) Connected KW, 2) Maximum Summer KW Demand, and 3) Maximum Winter KW Demand.
L.Complete the table concerning motor information.
M.If compensated metering will be used, indicate totalizer and general load (KW).
N.Include any additional comments.
O.
Application MUST be signed and dated.
Forms Rev. 5/18
PECO
Application for Electric Service & Meter
M-24175 (front) Rev. 5/18
INSTRUCTIONS:
Please complete the front page of this request and return to the PECO Regional Office (listed below) in the area service is required. Incomplete information may result in a delay in processing.
All work must comply with PECO Electric Service Requirements manual and be inspected by an approved inspection agency. (City of Philadelphia requests may be shared with Licenses & Inspections). Not all service voltages are available in all areas. Before purchasing electrical equipment or proceeding with any wiring, information regarding service availability and meter location should be obtained from the company.
A credit application and agreement must be completed if the customer has not had PECO service within the last 60 days. The company reserves the right to cancel this request if no further communication is received from the customer within 90 days of PECO's response date.
NOTE: IF DEMOLISHING A BUILDING AND NEED PECO TO REMOVE ELECTRIC OR GAS FACILITIES, PLEASE CALL 8-1-1 (PA ONE CALL) FOR DEMOLITION REQUEST
NEW BUSINESS SERVICES (1-800-454-4100) http://www.peco.com
PHILADELPHIA
DELAWARE & CHESTER COUNTIES
BUCKS & MONTGOMERY
NEW RESIDENTIAL
COUNTY
1050 W. Swedesford Rd.
COUNTIES
CONSTRUCTION
A
830 S. Schuylkill Ave.
Berwyn, PA 19312
400 Park Ave.
(All Counties)
Philadelphia, PA 19146
Email:DelChesterServiceApplications@ex
Warminster, PA 18974
Email:PhilaNewBusiness@e
eloncorp.com
Email:Bucksmontserviceapplications@e
Warminster, PA
18974
xeloncorp.com
Fax # (610) 725-1416
Email:NRCGMETERORDERS@P
Fax # (215) 731-2327
Fax # (215) 956-3240
eco-Energy.com
Fax # (215) 956-3380
CUSTOMER NAME
Tax ID # or SSN
TYPE OF REQUEST
New Service
Load Increase/Decrease
Reintroduction of Service
Temporary Service
Upgrade/Changes
Demolition (Remove
Separation of Wiring
Service Relocation
Service)
** ADDRESS TO BE SERVED
B
APARTMENT/LOT #
F
Make-Safe (De-
energize/Cover)
CITY, STATE
ZIP CODE
TYPE OF SERVICE: Please include site plan.
RESIDENTIAL
COMMERICAL
Single House
Mobile Home
Store
Office
G
Apartment
Modular Home
Industrial
Warehouse
UTILITY POLE#
SUBDIVISION/DEVELOPMENT
TOWNSHIP/MUNICIPALITY/WARD#
Duplex
Town House
Restaurant
Other _____________________________
Area of Building _______________________ Sq. Ft.
* If Applicable
SERVICE CHARACTERISTICS:
** Please use this address when applying for underwriter’s inspection
PHASE
VOLTS
WIRES
Underground
Aerial
CUSTOMERS BILLING ADDRESS
C
-OR-
PECO ENERGY ACCOUNT#
3
240
AMPS _________
120/240
4
120/208
TELE. #
1
120
2
277/480
13200
3 or 4
SEND REPLY TO:
5
33000
ELECTRICIAN’S OR BUILDER’S NAME
METER INFO:
Two Meters, Commercial (General/Totalizer)
I
Single Meter Required
Multiple Meter Total No. _____________
ADDRESS
Reply Requested by:
HEATING/AIR CONDITIONING:
D
/
Central Air _____ Tons
Resistance
J
Heat Pump _____ Tons
Natural Gas
Propane
Type Back-Up _________
Other ________________
City, State
CHARACTERISTICS OF NEW OR ADDITIONAL LOAD:
CONNECTED
PECO ENERGY USE ONLY (DEMAND)
TYPE
LOAD (kW)
E-MAIL ADDRESS
SUMMER (kW)
Winter (kW)
LIGHTING
K
CURRENT CONSUTRCTION STATUS:
HEATING
Not Started – Date Customer Will Start Work: _____/_____/_____
In Progress Completed
AIR/COND.
Approximate Date Service Requested: _____/_____/_____
E
TANKLESS WATER HTR
MISC
CUSTOMER COMMENTS/ DESCRIPTIN OF WORK
N
TOTAL
Include single line diagram and substation arrangement if appropriate.
LARGEST MOTOR SPECIFICATIONS
O
QUANTITY
TOTALIZER LOAD
SIZE (HP)
L
M
LOCKED ROTOR CURRENT
KW
MOTOR CODE LETTER
SUBMITTED BY: _________________________________ DATE: ______________________
GENERAL LOAD
VOLTAGE
Enclosures: Site Plans Single Line Diagram Substation Arrangement
FREQ. OF STARTING (PER HR.)
PURPOSE
INFORMATION BELOW WILL BE FILLED IN BY PECO:
Service Request No.
BUS/MAJ ACCT REP
TELEPHONE
DATA RECEIVED
DESIGNER
POL SUB
RATE
RIDER
CONTRACT LIMITS
SIC NUMBER
T
DATE REPLY
NUMBER
COMPLETED
AMPS
CIRCUIT
C-QUAD
T-QUAD
LOAD (KVA)
SUMMER_____WINTER ____
SERVICE CHARACTERISITICS – Select One from Each
POLE # / MH # LOCATION
CUT THROUGH DATE
SERVICE TYPE
URD
RATE:
Residential
Comm (Non-
Comm (Demand)
HT/PD
Demand)
GENERATION PROCUREMENT CLASS:
Class 1 (Residential)
Class 2 (Commercial, less than 100kW)
Class 3 (Commercial, 100kW to 500kW)
Class 4 (Commercial, greater than 500kW)
NOTE: The customer’s Initial Procurement Class will be determined by PECO, based on peak load
estimates for the first year of service. The customer’s Procurement Class will be adjusted each year,
based on actual usage.
METER TYPE:
KWH
IND. DEMAND
RECORDER
TOU
SERVICE PHASING:
SINGLE PHASE
TWO PHASE
THREE PHASE
SERVICE REQUIREMENTS:
METERING LOCATION AND REQUIREMENTS:
Present Location:
Meter # _______________
CTs-
PTs-________
Present Service OK
Loop Only
________
Taps Only
See Job # ________________________________
Indoo
Outdoor
On ________ Wall, ________ Ft. From ________ Wall, ________ ft. Above
r
Ground
ADVANCE NOTIFICATIONS:
CUSTOMER BILLING:
Underwriter’s Cert.
Yes
No
Advance Billing
$_______________
Required
__
Customer to Trench
No Customer
Permit Required
State
Other
Charges:
_______________________
Cust. #
Date
ACT 222 Cert. Required
Yes #
N/A
_________________________
___________________________
_____________
BTCO #
PA One Call #
________________________
__________________________
CATV #
Gas
BTCO
CATV
___________________
Other
SKETCH / INSTRUCTIONS
PHILADELPHIA COUNTY
Email:PhilaNewBusiness@ex
Email:DelChesterServiceApplications@exe
loncorp.com
*
If Applicable
**
Please use this address when applying for underwriter’s inspection
E-MAIL ADDRESS #
Not Started – Date Customer Will Start Work: _____/_____/_____ In Progress Completed
CUSTOMER COMMENTS/ DESCIPTION OF WORK:
T NUMBER
SUMMER_____WINTER
____
Comm (Non-Demand)
NOTE: The customer’s Initial Procurement Class will be determined by PECO, based on peak load estimates for
the first year of service. The customer’s Procurement Class will be adjusted each year, based on actual usage.
CTs- ________
Indoor Outdoor
On ________
Wall, ________ Ft. From ________ Wall, ________ ft. Above Ground
See Job # _________________________________
Underwriter’s Cert. Required
Advance Billing Required Yes
$_________________
No Customer Charges: $_________________
Other _______________________
Cust. # _________________________
Date ___________________________
Yes # _____________
BTCO # ________________________
PA One Call # ___________________________
Date __________________________
CATV # ________________________
Other ___________________
Other __________________________
Filling out the PECO Service and Meter Application form is a crucial step for customers looking to receive electric services tailored to their needs. This process helps ensure that your electric service is set up efficiently and in accordance with local regulations. To complete the application correctly, follow these detailed steps.
After submitting the application, it undergoes a review process to ensure all information complies with PECO Electric Service Requirements and local inspection regulations. Depending on your service specifications and the completeness of the form, you may be contacted for further details or to clarify information. Accurate completion of the form helps avoid delays, ensuring your electric service setup proceeds smoothly. PECO will issue a service request number upon acceptance of the application, marking the beginning of the process to establish or modify your electric service.
What steps should I follow to apply for PECO electric service and a meter?
To apply for PECO electric service and a meter, you first need to review the instructions at the top of the application form. Identify the appropriate PECO regional office for your service area and send your completed application to that office. Ensure that all required information, including your personal identification number (Driver's License Number or Social Security Number), the service location, billing information, and details about your project and electrical needs, is accurately filled in. If you are demolishing a building, remember to contact PA ONE CALL at 8-1-1 for demolition requests. Lastly, ensure that the application is signed and dated before submission.
Is it necessary to provide a Driver's License Number or Social Security Number when applying?
Yes, it is now required to include your Driver's License Number or Social Security Number in the application. This information helps PECO in processing your application and ensuring the accuracy of customer identification and billing.
How do I determine which PECO regional office to send my application to?
The application form lists regional offices for different areas, including Philadelphia County, Delaware & Chester Counties, and Bucks & Montgomery Counties, for example. Review these options and select the office that corresponds to the location where the service is requested. Addresses and contact details for each regional office are provided in the application form.
What should I do if I need electric service for a new construction project?
If you require electric service for a new construction project, complete the application form with detailed information about the project, such as the type of service, construction status, expected date for service initiation, and any specific service characteristics or metering information. Include any additional documentation, such as site plans or single line diagrams, that may be necessary for PECO to understand the scope and requirements of your project.
Can I apply for a temporary electric service through this application?
Yes, you can apply for temporary electric service by indicating this request in the "Type of Request" section of the application. Provide all required supporting information regarding the temporary service setup and duration.
What if I have not had PECO service in the last 60 days?
If you haven't had PECO service within the last 60 days, you will need to complete a credit application and agreement in addition to this service and meter application. This process helps establish your account and billing setup with PECO.
What happens if my application information is incomplete?
An incomplete application may result in delays in processing. It's important to review your application carefully and ensure that all necessary information is provided. This includes accurate personal identification, specific service requests, and any technical details related to your electric service needs. PECO may require additional communication or documentation to complete your request if any information is missing or unclear.
Filling out the PECO Service and Meter Application form can be a meticulous task that requires attention to detail. Common mistakes can delay the process, affecting the timeline for getting electric service started or modified. These mistakes, however, are avoidable with careful review and comprehension of the form's requirements. Here are four common errors that people often make:
Not providing complete information: It’s crucial to fill out every applicable section of the form. Incomplete information can lead to delays. For example, omitting the electrician or builder’s Tax Identification Number or failing to indicate the type of service requested (e.g., new service, load increase/decrease) can halt the application process.
Misunderstanding service location details: The form requires specific information about the service location, including if there's an existing utility pole or lot number. Applicants sometimes miss including these details or use the incorrect address for the underwriter’s inspection, which is essential for processing the application efficiently.
Overlooking construction status and deadlines: Section E requires information about the current construction status and the desired date for PECO service commencement. Applicants often state they want the service “as soon as possible” without providing a specific date, or they do not update this section to reflect the current status of construction, leading to miscommunication about readiness for service installation.
Incorrect or missing details about load and motor information: Sections K and L ask for specific details about load characteristics and motor information, including connected KW and maximum demand. Applicants either skip these sections, underestimate their importance, or provide inaccurate information. This oversight can result in inadequate service provision that doesn't meet the applicant's actual needs or delays while the correct details are obtained.
To avoid these common mistakes, applicants should:
By paying careful attention to these common pitfalls and preparing thoroughly, applicants can streamline the process of submitting their PECO Service and Meter Application form, helping ensure a smoother and quicker path to obtaining electric service.
When completing a PECO Service and Meter Application, it is important to be aware that other forms and documents may also be required to ensure a successful and comprehensive submission process. These additional materials support the application by providing more detailed information, helping to avoid delays, and ensuring compliance with all necessary regulations and requirements.
These documents collectively enable a smooth process for requesting electric service and meter installation. They serve to streamline communications, comply with legal and safety requirements, and ensure that the utility provider has all the necessary information to proceed with the request promptly and efficiently. It’s recommended to check with PECO for the specific requirements applicable to your situation, as requirements may vary based on the scope of work, location, and other factors.
Utility Connection or Upgrade Request Forms: These are used by individuals or businesses to request new utility services or upgrades to existing services. Similar to the PECO form, these documents require detailed information about the location, type of service requested (such as gas, water, or electricity), and customer details. Both types of documents are crucial for ensuring the proper installation and billing of utility services.
Building Permit Applications: When planning construction or significant renovations, building permit applications are required by local municipalities. These applications often require similar information to the PECO document, such as the project's address, description of the work to be performed, and details about the contractors hired for the job. They ensure that all construction complies with local codes and safety standards.
Electrical Inspection Requests: For new constructions or major electrical system overhauls, electrical inspection requests are submitted to ensure the electrical work complies with the National Electrical Code (NEC) and local regulations. Like the PECO form, these requests include details about the job's location, the electrical contractor's information, and specifics about the electrical system's characteristics. These documents are vital for maintaining electrical safety and functionality.
Credit Application Forms for Utility Services: These forms are filled out by customers seeking to establish or re-establish credit with utility companies for services such as electricity, gas, or water. Similar to sections of the PECO application, they gather personal information, including the customer's name, address, and sometimes social security number or tax identification number, to assess the customer's creditworthiness. This process helps utility companies manage financial risk.
When filling out the PECO Service and Meter Application form, it is important to follow specific guidelines to ensure the application is processed efficiently and accurately. Here are six things you should do and six things you shouldn't do:
Do:
Don't:
There are several misconceptions about the PECO Service and Meter Application form that can lead to confusion for applicants. Understanding these points clearly helps in avoiding errors that might delay the process of getting electrical service.
Understanding these points about the PECO Service and Meter Application can help applicants avoid common pitfalls and set realistic expectations about the process.
Filling out the PECO Service and Meter Application correctly is crucial for obtaining electric service efficiently. Here are the key takeaways to ensure your application process is smooth:
Remember, submitting a complete and accurate application not only helps avoid delays but also ensures that your electrical service needs are met appropriately. If you need assistance during this process, PECO provides resources and support to guide you.
How to Call in a 9 Line - Designed to be filled out quickly to ensure rapid response in emergency situations.
Aia Statement of Qualifications - This qualification statement can also promote transparency in the construction industry, leading to stronger relationships between contractors and project owners.
Is Geico Cheaper Than Progressive? - Fulfilling this form thoroughly is essential for repair facilities to secure GEICO’s authorization for supplemental claim amounts.